Incold S.p.A.
Via Grandi, 1,
45100
Rovigo
Italy
Italy
Location
Media files
-HD_1280X720_2.jpg "Incold")
Hall map
Fairground map
Our range of products
Product categories
- 03 Refrigeration systems
- 03.04 Cold rooms, deep-freeze rooms
Cold rooms, deep-freeze rooms
- 03 Refrigeration systems
- 03.05 Equipment for refrigerated and deep-freeze storage
Equipment for refrigerated and deep-freeze storage
Our products
Product category: Refrigeration systems, Cold rooms, deep-freeze rooms
MULTISYSTEM
Multisystem is a range of fully modular and extendable cold rooms.
Its modularity and the complete range of accessories permit the assembling with camlocks of simple and complicated project, can be extended / partitioned for future needs and permits the use of just a few different types of panels for a large number of coldrooms dimensions facilitating those distributors who work with stock of panels.
Its modularity and the complete range of accessories permit the assembling with camlocks of simple and complicated project, can be extended / partitioned for future needs and permits the use of just a few different types of panels for a large number of coldrooms dimensions facilitating those distributors who work with stock of panels.
Product category: Cold rooms, deep-freeze rooms, Equipment for refrigerated and deep-freeze storage
OVERLAPPING MONOBLOCS
OVERLAPPING MONOBLOCS
Functional and practical, this range is the most essential of keyblock’s products. These monoblocs for cold rooms are manufactured for the storage of fresh and ready-frozen products in small and medium-sized concerns. They are installed to cross over the cold room wall. The main characteristics and optional extras are as follows:
hermetic compressors
air or water condensing
valve or capillary pipe refrigerant expansion
defrost water evaporation using an evaporation basin with hot gas throw
electronic control for the refrigerating system
cold room lighting system
door resistor connection cable
high pressure pressostat with fjxed setting and manual reset
Functional and practical, this range is the most essential of keyblock’s products. These monoblocs for cold rooms are manufactured for the storage of fresh and ready-frozen products in small and medium-sized concerns. They are installed to cross over the cold room wall. The main characteristics and optional extras are as follows:
hermetic compressors
air or water condensing
valve or capillary pipe refrigerant expansion
defrost water evaporation using an evaporation basin with hot gas throw
electronic control for the refrigerating system
cold room lighting system
door resistor connection cable
high pressure pressostat with fjxed setting and manual reset
Product category: Equipment for refrigerated and deep-freeze storage
HINGED 1 LEAF
The PCE-E series of hinged doors, available on both positive and negative temperature models, consist of 4 essential parts as specified below.
A - Frame in plastic material internally reinforced in steel. In the low temperature version it is equipped with a heating element. It is complete with counterframe that serves to fasten it on prefabricated panels.
B - Leaf consisting of two supports in prepainted sheet white Ral 9010 surrounded by a profile in anodized aluminum with rigid polyurethane foam injected on the inside to act as thermal insulation. Along the edge in anodized aluminum, special rubber gasket guarantees the temperature seal. The hardware consists mainly of the exclusive handle model France, complete with key lock and luminescent safety release on the inside and one or more helical hinges, adjustable with screws. The leaf comes in three different thicknesses depending on the working temperature:
CE 07 TN for uses up to – 5°C
CE 09 BT for uses up to – 18°C
CE BT for uses up to – 30°C
C - Threshold, connected to the frame, can be in 4 different types according to the required use of the door.
D - Connecting profiles in stainless steel for fastening on prefabricated panels. An optional version has the counterframe in reinforced plastic material
A - Frame in plastic material internally reinforced in steel. In the low temperature version it is equipped with a heating element. It is complete with counterframe that serves to fasten it on prefabricated panels.
B - Leaf consisting of two supports in prepainted sheet white Ral 9010 surrounded by a profile in anodized aluminum with rigid polyurethane foam injected on the inside to act as thermal insulation. Along the edge in anodized aluminum, special rubber gasket guarantees the temperature seal. The hardware consists mainly of the exclusive handle model France, complete with key lock and luminescent safety release on the inside and one or more helical hinges, adjustable with screws. The leaf comes in three different thicknesses depending on the working temperature:
CE 07 TN for uses up to – 5°C
CE 09 BT for uses up to – 18°C
CE BT for uses up to – 30°C
C - Threshold, connected to the frame, can be in 4 different types according to the required use of the door.
D - Connecting profiles in stainless steel for fastening on prefabricated panels. An optional version has the counterframe in reinforced plastic material
About us
Company details
INCOLD S.p.A. was founded in 1996 as a separate company and member of the Arneg group, devoted to the production of cold rooms.
A specialized technical team and the knowledge of the market acquired in the sphere of the group at the world level have enabled INCOLD to become a European reference in just a few years, in the field of commercial and industrial cold rooms, isothermal panels and isothermal doors.
The plant, easily reached on the A13 motorway, occupies an area of about 80,000 square metres.
INCOLD has an annual production capacity of over 1,000,000 square metres of panels and over 15,000 isothermal doors.
A specialized technical team and the knowledge of the market acquired in the sphere of the group at the world level have enabled INCOLD to become a European reference in just a few years, in the field of commercial and industrial cold rooms, isothermal panels and isothermal doors.
The plant, easily reached on the A13 motorway, occupies an area of about 80,000 square metres.
INCOLD has an annual production capacity of over 1,000,000 square metres of panels and over 15,000 isothermal doors.
Company data
Sales volume50-99 Mio US $
Export contentmax. 50%
Number of employees50-99
Foundation1996
Area of businessRefrigeration systems