Lampre S.r.l.

Via A. Magni, 2, 20865 Usmate Velate (Mb)
Italy

Telephone +39 039 6742-27
Fax +39 039 6750-18
lampre@lampre.com

Hall map

EuroShop 2017 hall map (Hall 16): stand B80

Fairground map

EuroShop 2017 fairground map: Hall 16

Our range of products

Product categories

  • 01  Shopfittings, shop furnishings, store design & visual merchandising
  • 01.01  Shop furnishings
  • 01.01.08  Showcases, display cases
  • 01  Shopfittings, shop furnishings, store design & visual merchandising
  • 01.01  Shop furnishings
  • 01.01.09  Wall systems
  • 01  Shopfittings, shop furnishings, store design & visual merchandising
  • 01.01  Shop furnishings
  • 01.01.10  Shelf systems
  • 01  Shopfittings, shop furnishings, store design & visual merchandising
  • 01.02  Shopfittings
  • 01.02.04  Wall coverings
  • 01  Shopfittings, shop furnishings, store design & visual merchandising
  • 01.03  Store design & visual merchandising
  • 01.03.01  General planning and services
  • 01.03.01.01  Shop architecture and store design
  • 03  Refrigeration systems
  • 03.01  Refrigeration cabinets, deep-freeze units
  • 03.01.01  Refrigeration cabinets (shelves, island units, chests)
  • 03  Refrigeration systems
  • 03.02  Frozen food display cabinets, refrigeration systems, heat recovery systems

Frozen food display cabinets, refrigeration systems, heat recovery systems

  • 03  Refrigeration systems
  • 03.03  Refrigerated and deep-freeze storage
  • 03  Refrigeration systems
  • 03.04  Cold rooms, deep-freeze rooms
  • 03  Refrigeration systems
  • 03.05  Equipment for refrigerated and deep-freeze storage
  • 04  Catering and hospitality equipment
  • 04.05  Microwave ovens
  • 04  Catering and hospitality equipment
  • 04.06  Coffee machines
  • 04  Catering and hospitality equipment
  • 04.08  Ice makers
  • 05  Building service engineering and energy management
  • 05.01  Lifts
  • 05  Building service engineering and energy management
  • 05.02  Escalators, moving walkways
  • 10  Reference projects
  • 10.03  Solutions for franchise systems & shopping centres
  • 10  Reference projects
  • 10.04  Solutions for gastronomy

Our products

Product category: Showcases, display cases, Wall systems, Shelf systems, Wall coverings, Shop architecture and store design, Refrigeration systems, Refrigeration cabinets (shelves, island units, chests), Frozen food display cabinets, refrigeration systems, heat recovery systems, Refrigerated and deep-freeze storage, Cold rooms, deep-freeze rooms, Equipment for refrigerated and deep-freeze storage, Microwave ovens, Coffee machines, Ice makers, Lifts, Escalators, moving walkways, Solutions for franchise systems & shopping centres, Solutions for gastronomy

Pre-coated, Pre-painted and Colaminated Steel Production.



Standard metal supports
- Hot dip galvanized steel
- Cold-rolled
- Aluminium
- Stainless steel

Coating
- Steel sheets and strips coated on one or both side with PVC film or PPS film (PVC+PET)
- Pre-painted steel coated on one or both side with polyester paint up to 35 µm
- Colaminated steel coated on one or both side with paint and PET film

Available formats
- Sheets
- Strips
- Coil

Dimensions

- Thickness of the metal support: from 0,3 mm to 2 mm / .0118 to .078 inches.
 

- Sheet:
Max width 1500 mm / 55.118 inches
Max length 5000 mm / 196.85 inches
- Strip:
Max width 1500 mm / 55.118 inches
Minimum width 19mm / .748 inches
- Coil:
I.D. 500 mm / > 20 “
O.D. 1550 mm / 61.02 inches

More Less

Product category: Showcases, display cases, Wall systems, Shelf systems, Wall coverings, Shop architecture and store design, Refrigeration systems, Refrigeration cabinets (shelves, island units, chests), Frozen food display cabinets, refrigeration systems, heat recovery systems, Refrigerated and deep-freeze storage, Cold rooms, deep-freeze rooms, Equipment for refrigerated and deep-freeze storage, Microwave ovens, Coffee machines, Ice makers, Lifts, Escalators, moving walkways, Solutions for franchise systems & shopping centres, Solutions for gastronomy

Non Coated Stell Production

LAMITAL

Galvanized, thin thickness from 0.3mm to 3.00mm (0.01”x 0.1”)
Quality: DX51D
Microperforated Brilliant Surface MA Type
Skinpassed Surface MB Type
Coverings Z100-Z140-Z200-Z275-Z600-Z725
Coils up to 1500mm(59”) maximum width
Strips from 25mm (1″) minimum width up to 1500mm (59”) maximum width
Sheets in commercial size 1000x2000mm (40”x79”), 1250x2500mm (49”x98”), 1500x3000mm (59”x118”)
Cut to length sheets, maximum width up to 1500mm (59”) and length up to 4990mm (196”)
Blankets, minimum dimension 350mm (14”)
Possibility of adding protective film up to 1500mm (59”) wide
Pre-coated, thickness 0.45mm, 0.6mm, 0.8mm, 1.5mm, 2.00mm (0.17”, 0.02”, 0.03”, 0.6”, 0.8”)
Testa di Moro colour (C73) e Bianco Grigio Colour (C17)
1 or 2 sides
Coils up to 1500mm (59”) maximum width
Strips from 25mm (1″) minimum width up to 1500mm (59”) maximum width
Sheets in commercial size 1000x2000mm (40”x79”), 1250x2500mm (49”x98”), 1500x3000mm (59”x118”)
Cut to lenght sheets, maximum width up to 1500mm (59”) and length up to 4990mm (196”)
Blankets, minimum dimension 350mm (14”)
Possibility of adding a protective film up to 1500mm (59”) wide
Aluzinc (custom order only), thickness from 0.4mm to 3.00mm (from 0.06″ to 0.12″)
With or without Easyfilm
Coils up to 1500mm (59”) maximum width
Strips from 25mm (1″) minimum width up to 1500mm (59”) maximum width
Sheets in commercial size 1000x2000mm (40”x79”), 1250x2500mm (49”x98”), 1500x3000mm (59”x118”)
Cut to lenght sheets, maximum width up to 1500mm (59”) and length up to 4990mm (196”)
Blankets, minimum dimension 350mm (14”)
Possibility of adding a protective film up to 1500mm (59”) wide
Magnelis (custom order only), thickness from 0.4mm to 3.00mm (from 0.06″ to 0.12″)
Coils up to 1500mm (59”) maximum width
Strips from 25mm (1″) minimum width up to 1500mm (59”) maximum width
Sheets in commercial size 1000x2000mm (40”x79”), 1250x2500mm (49”x98”), 1500x3000mm (59”x118”)
Cut to lenght sheets, maximum width up to 1500mm (59”) and length upt to 4990mm (196”)
Blankets, minimum dimension 350mm (14”)
Possibility of adding a protective film up to 1500mm (59”) wide
Anti drop
Application of anti fog materials on galvanized support
Coils up to 1500mm (59”) maximum width
Sheets in commercial size 1000x2000mm (40”x79”), 1250x2500mm (49”x98”), 1500x3000mm (59”x118”)
Cut to length sheets, maximum width up to 1500mm (59”) and length up to 4990mm (196”)
Blankets, minimum dimension 350mm (14”)
LAMFER
PRODUCTS AND SERVICES
NARROW STRIPS, LARGE STRIPS, STRIPS, METAL SHEETS
Cut from 3.00x1500mm (0.04”x59”) longitudinal cutting lines and from flattening lines with longitudinal/cross sectional cut of 3.00x1500mm (0.04”x59”)
The products in the above category are:

Cold rolled, thickness from 0,3mm a 2,99mm
Quality: DC01 – DC03 – DC04 – DC05 – DC06
MB controlled aspect and finishes for particular details to be varnished.
Quality: DC01 EK – DC04 EK – DECARBONIZED (SOLFER/UNISMALT) for traditional Enameling with both hands, through dust and direct with one hand
Hot rolled pickled steel, thickness from 1.5mm a 3.00mm (from 0.06”to 0.04”)
Quality: DD11 – DD12 – DD13 – HIGH PERFORMANCE (S 240 MC – S 420 MC – S 500 MC)
Electrogalvanized 25/25
a) Cold rolled support, thickness from 0.36mm a 2.99mm (from 0.01” to 0.12”)
Quality: DC01 – DC03 – DC04 – DC05 – DC06
Aluminized, thickness from 0.40mm to 2.00mm (from 0.16” to 0.08”)
Quality: DX51D – DX52D – DX53D – DX54D
Covering: 80 – 100 – 120 gr/mq
Lamital and Lamfer are able to offer on all products restricted tolerances on width, length, squaring off and flatness.

More Less

About us

Company details

Lampre is synonymous with pre-coated steel.
The name itself derives from the abbreviation of LAMiere (“Steel” in Italian) and PREcoated, and indicates an industrial idea dedicated to continuous coating of hot-rolled steel. Since the 1990s Lampre began its internationalization strategy aimed to get closer to local needs and to contain transport costs. The new production plant of Lampre Polska brings to seven the total number of lines, of which four are in Lampre Italy, one in Lampre Portuguesa and one in Lampre Benelux. The recent opening of Lampre Turçelik, the Turkish service center, and of Lampre USA, hub of distribution for North America, improve our ability to interpret the needs of a market in constant evolution. The two Italian services centers, Lamital and Lamfer, complete Lampre’s strategic investment goal which is dedicated to meeting the full needs of our customers. Lampre believes that the constant reinvestment of resources in new technologies and in production processes is the foundation to maintain its leadership role in the field of pre-coated metal. The company dedicates to R&D 5% of our staff and more than 3% of the annual turnover, of which 40% is dedicated to the development of eco-sustainable products. Lampre has developed into a worldwide network operating in all major global markets by providing superior customer service and consistent quality products. Despite the fact Lampre has today become multinational corporation, the company is proud to maintain those principles upon which the company was founded. Lampre is a company whose name is known to the general public also thanks to the cycling team that for 20 years has been bearing our name on the roads all around the world.

More Less